Millenium Colorworks Inc.
PO Box 1102
W. Babylon, NY, 11704

I. Product And Company Identification
Product Name: Millenium Colorworks Inks

II. Composition/Information on Ingredients
CAS# Chemical Name
No. CAS number
Please see Section VII for product and component exposure guidelines.
Components not listed are not physical or health hazards as defined in 39 CFR 1910.1200 (Hazard Communication Standard).

III. Hazards Identification

HMIS Rating Health: 1 Flammability: 1 Reactivity: 0

Immediate (Acute) Health Effects by Route of Exposure
Inhalation: Can cause minor respiratory irritation, dizziness, weakness, fatigue, nausea, and headache.
Skin Contact: Can cause minor skin irritation, defatting, and dermatitis.
Eye Contact: Can cause minor irritation, tearing and reddening.
Ingestion: Mildly irritating to mouth, throat, amd stomach. Can cause abdominal discomfort.

Long-Term (Chronic) Health Effects

This product is a carcinogen or contains a carcinogen as listed by the
following groups:

OSHA: No NTP: No IARC: No NIOSH: No

IV. First-Aid Measures

Inhalation: Remove to fresh air. If breathing is difficult, have a trained individual administer oxygen. If not breathing, give artificial respiration and have a trained individual administer oxygen. Get medical attention immediately.
Eyes: None expected to b4e needed, howeve4r, use an eyewash to remove chemical from your eye regardless of the4 level of hazard.

Skin Contact: Wash with soap and water.
Ingestion: No hazard in normal use. Do not induce vomiting. Seek medical atte4ntion if symptoms develop. Provide medical car4e providfe4d with the MSDS.

V. Fire Fighting Measures

Flammability Combustible at elevated temperatures
Summary:
Extinguishing Media: Use alcohol resistant foam, carbon dioxide or dry chemical when fighting fires. Water or foam may cause frothing if liquid is burning but it still may be useful extinguishing agent if carefully applied to the surface of the fire. Do not direct a stream of water into the hot burning liquid.

Fire and/or Explosion
Hazards:
Material may be ignited only if preheated to temperatures above the high flash point, for example in a fire.
Fire Fighting Do not enter fire area without proper protection including self-
Methods and contained breathing apparatus and full protective equipment.
Protection: Fight fire from a safe distance and a protected location due to the
Potential of hazardous vapors and decomposition products. Use methods for the surrounding fire.
Hazardous Carbon dioxide, Carbon monoxide
Combustion
Products:

Flash Point: Greater than 93C (200 F)

VI. Accidental Release Measures
Personal No adverse health affects from the clean-up of spilled
Precautions material. Follow personal protective equipment
And recommendations found in Section VII of this MSDS.
Equipment:

VII Handling and Storage
Handling No special handling instructions due to toxicity.
Precautions:
Storage Store in a cool dry place. Isolate from incompatible
Conditions: materials.

VIII Exposure Controls/Personal Protection
Engineering No engineering controls are likely to be required to maintain
Measures: operator comfort under normal conditions of use.

Respiratory No respiratory protection required under normal conditions of
Protection: use.

Skin Not normally considered a skin hazard. Where use can result in
Protection: skin contact, practice good personal hygiene. Wash hands and
Other exposed areas with mild soap and water before eating,
Drinking, and when leaving work.
Wear impervious material no specific details available.
Exposure
Guidelines:
CAS Number OSHA Exposure ACGIH TLV-TWA ACCGIH IDLH
Limits STEL
No CAS number

If this product is provided in a dry powder state it should be considered a nuisance dust
(PEL 10 mg/m3).

If the processing of this product produces a mist it should be considered to be an oil mist with a
PEL of 5 mg/m3.

IX Physical and Chemical Properties
Physical State Liquid, semi-solid, or solid
Solubility in Water Not determined
Volatiles, % by wt. 68.81
Volatiles, % by vol. 70.58
Volatile Organic Chemical % by wt 0.22
Volatile Organic Chemicals % by vol0.22
Solids % by weight 31.19
Solids % by volume 29.42
Boiling Point 100 deg. C 212 deg. F
Specific Gravity 1.025
Bulk Density (Lb/Gal) 8.538

X. Stability and Reactivity
Stability: Stable under normal conditions
Conditions to Avoid: Temperatures above the high flash point of this combustible material in combination with sparks, open flames, or other sources of ignition.
Materials to Strong oxidizing agents
Avoid/Chemical
Incompatibility:

X1 Toxicological Information
Component Toxicology Data (N1OSH):
CAS Number LD59/LC50
No CAS number
X11. Disposal Considerations

Waster Description Spent or discarded material is not expected to be a
For Spent Product: hazardous waste

Disposal Methods: Dispose in accordance with Federal State, Provincial
And Local regulations. Material may be compatible with
Industrial waste incineration or inclusion in a fuel blending
Program. This characterization is subject to approval by your waster management contractor. This material should be recycled if possible.
X11 Transportation Information

OT Basic DOT & IATA: Not determined
Description:
UN Number: NA

X1V. Regulatory Information
TSCA Status All ingredients of this products are listed or are excluded from listing on the U.S. Toxic Substances Control Act (TSCA) Chemical Substance
Inventory.

Chemical Name CAS# Regulation Percentage
Not on list CERCLA
Not on list NPR1 (Cdn)
Not on list PROP 65
Ammonia 7664-41-7 SARA 313 <.1
Ammonia 7664-41-7 SARA 313 <.1

The following items require export notification for TSCA
Chemical Name TSCA 12b list section
Not on list

This product falls under the following WHMIS class:

The following chemicals are disclosed to satisfy New Jersey and Pennsylvania Right to Know Laws:

XV Additional Information
Other:
References
Disclaimer:

While Millenium Colorworks Inc. believes the data set forth herein are accurate as of the data hereof, Millenium Colorworks Inc. makes no warranty with respect thereto and expressly disclaims all liability for reliance thereon, such data are offered solely for your consideration, investigation, and verification.