Tattoo Power Supplies — HY1502C DC Power Supply — 110v or 220v
Subscribe to be notified when product comes back in stock.
SKU | TAT-581-HY1502C |
---|---|
Weight | 8.850000 |
Brand | Precision |
This tattoo power supply can be used for any project that requires a stable voltage up to 15v. It offers both coarse and fine adjustment controls for both the voltage and the amperage. The HY1502C DC Power Supply is manufactured under the ISO9001 Quality Management System.
Please Note: The HY1502C DC Power Supply comes equipped with a USA North American plug only. This power supply can be used with our Foot Pedal & Clip Cord with Banana Plug Ends combo units. Refer to the links below to purchase a separate compatible power supply.
Specifications:
- Weight: 8.2 lbs
- Measurements: 9" (H) x 6-3/4" (W) x 3-3/4" (D)
- Output Voltage: 0–15v @ 2A
- Output Current: 0-2A
- Input Voltage: 110V/60Hz–220V/50Hz; Works all over the world (comes packaged with North American plug only)
- Constant voltage/ constant current
- Voltage and current adjustment
- Power effect: CV<0.01%+1mV, CC<0.2% + 1mA
- Overload effect: CV<0.01% +3mV, CC<0.2% +3mA
- Waves and noises: CVProtection: High current limited.
- Ripple & Noise:Output Current: 0-3 A
- Operating Temperature: 0–102 F (0-40 C) Relative Humidity: <90%
- Accuracy is within + or - 2.5%
- Manufactured under ISO9001 Quality Management System
- One year warranty
Foot Pedal with Banana End Clip Cord Combo Unit
Foot Pedal with Banana End Clip Cord Combo Unit — Version 2
Resources:
Circuit Diagram of 1502C Power Supply.
Standard Body Jewelry Measurements
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Standard Body Jewelry Threading
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Internal Thread Patterns by Gauge
Gauge |
18g, 16g |
14g, 12g |
10g–00g |
Internal Thread Pattern |
0.8mm or 0.9mm |
1.2mm |
2.0mm |
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
External Thread Patterns by Gauge
Gauge |
18g, 16g |
14g, 12g, 10g |
External Thread Pattern |
1.2mm |
1.6mm |