Peak Lazur Tattoo Power Supply
SKU | PEAK-005 |
---|---|
Weight | 1.8110 |
Brand | Peak |
Lazur Magnetic Tattoo Power Supply by Peak — Dual Output Operation
Enjoy efficient, peak-level tattooing with the Peak Lazur Tattoo Power Supply. This power supply allows artists to operate up to two tattoo machines at the same time. During operation, the display screen shows your output voltage, amps, and speed (Hz); it also indicates the corresponding aluminum power knobs (L for left and S for right); a short press of either power knob allows you to switch between machine outputs while tattooing. A long-press of either power knob enables the strong start function.
This power supply offers two foot pedal modes: continuous and momentary. It is set to momentary mode by default; a short-press of the active power knob allows you to shift into continuous mode. After 5 minutes of being inactive, this power supply goes into sleep mode. To resume function, simply tap your foot pedal or press the active power knob.
For a secure setup, this power supply has a magnetic bottom. It also comes equipped with two USB 2.0A charging ports for use with other devices, and has built-in short circuit protection. It is compatible with standard 1/4” clip cords and foot pedal connections.
The Peak Lazur Tattoo Power Supply works with comes with 1 US power cable (Euro power cable available separately), 1 adapter, and 20 disposable protective knob covers. It also comes with a user manual and warranty information.
Specifications:
- Dimensions: 7.2” (L) x 4.8” (W) x 3.1” (H)
- Operates up to 2 machines
- Comes with display screen; shows output (voltage, amps, + speed (Hz)
- Dual power knobs for separate voltage adjustment
- Input voltage: 100v–240v
- Output voltage: 0v–18v; 0.1v voltage adjustment increments
- Start-up voltage: 10v; start-up voltage can be adjusted
- Input current: 3.4A
- Magnetic bottom for stable set-up
- Equipped with two USB 2A charging ports for use with other devices
- Features built-in short circuit protection
- Compatible with standard 1/4” clip cords and foot pedal connections
- 1 adapter, and 20 disposable knob caps included with purchase
- 1 US power cable included; Euro power cord available for purchase separately
- 2-year manufacturer’s warranty
Standard Body Jewelry Measurements
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Standard Body Jewelry Threading
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Internal Thread Patterns by Gauge
Gauge |
18g, 16g |
14g, 12g |
10g–00g |
Internal Thread Pattern |
0.8mm or 0.9mm |
1.2mm |
2.0mm |
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
External Thread Patterns by Gauge
Gauge |
18g, 16g |
14g, 12g, 10g |
External Thread Pattern |
1.2mm |
1.6mm |