Stainless Steel 1" Pin Taper for 18g Internally Threaded or Threadless Jewelry
- 10 + for $0.99 each and save 50%
- 100 + for $0.75 each and save 62%
SKU | RES240 |
---|---|
Weight | 0.0012 |
Brand | Painful Pleasures |
18g Stainless Steel Insertion Pin Taper 1” for Internally Threaded or Threadless Jewelry
This 1”pin taper is used to install 18g threadless or internally threaded jewelry in one swift motion. It measures 1.05mm at its thickest point and 0.5mm at its thinnest. The polished implant grade stainless steel is autoclave safe or can be disposed after one use due to its low cost.
Specifications:
- Material: 316L ASTM F-138 Implant Grade Stainless Steel
- Gauge: 18g (1.0mm)
- Length: 1” (25mm)
- Threadless pin
- Compatible with 18g internally threaded and threadless jewelry
- Price per one pin taper
Standard Body Jewelry Measurements
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Standard Body Jewelry Threading
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Internal Thread Patterns by Gauge
Gauge |
18g, 16g |
14g, 12g |
10g–00g |
Internal Thread Pattern |
0.8mm or 0.9mm |
1.2mm |
2.0mm |
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
External Thread Patterns by Gauge
Gauge |
18g, 16g |
14g, 12g, 10g |
External Thread Pattern |
1.2mm |
1.6mm |