2.75mm 14kt 3D White Gold Star Threadless Push Pop Top – Price per 1

Add variety to your push pop tops with this 2.75mm 3D star. The star is 14kt White Gold and the push pop end that goes into a compatible labret post is made from 316L Stainless Steel. You can fit these tops into any of our threadless 18g, 16g, or 14g labret posts. These tops are similar to push pin and push fit tops and allow you to switch up your style with ease. You are purchasing the star top only, scroll down to view compatible labret posts.

Specifications:

• Material: 316L ASTM F-138 Implant Grade Stainless Steel push pop, 14 kt. White Gold star
• Gauge: Works with 18g (~1.0mm), 16g (~1.2mm), or 14g (~1.6mm)
• Star size: 2.75mm
• Threadless, push pop style
• Price per 1 push pop top only

How to Use Push Pop Jewelry:

Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place. Follow the instructions below to secure the threadless end into the threadless shaft (see the image in the gallery of images for a diagram of how to use push pop jewelry)

1. Insert the pin one-third to halfway into the shaft.
2. Hand-bend slightly the insertion pin against the shaft, as shown in the gallery of images.
3. Push the end into the shaft and test the fit.

Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.

18g Compatible Jewelry:

18g Titanium Push Pop Threadless Regular Back Labret PostOpens a new window
18g Titanium Push Pop Threadless Small Back Labret PostOpens a new window

16g Compatible Jewelry:

16g Titanium Push Pop Threadless Flat Disc Labret Post
Opens a new window16g Titanium Push Pop Threadless Small Back Labret PostOpens a new window
16g Titanium Push Pop Threadless UFO Disc Labret Post

14g Compatible Jewelry: