LIGHT WASH FRIDAY - Save Up To 50% on Select Supplies!
$5.25
UR135-4mm
All inventory in cart
45 available
UR135-6mm
10 available
$6.25
UR135-8mm
51 available
8g-0g Bondage Lock Hardware
These stainless steel locks are available in a variety of gauge sizes. Available sizes include 8g (3.0mm) through 0g (8.0mm). Each lock has an inner diameter of 1/4” (~6mm). The length of the lock from the top of the base to the arc varies depending upon gauge size. The 8g (3.0mm) lock has a length of 10mm, 6g (4.0mm) and 4g (5.0mm) have a length of 8mm and 0g (8.0mm) has a length of approximately 14mm.
Each lock is comprised of 3 parts: screw, base and lock. The screw on the bottom of the base can be loosened and tightened with either a finger nail or screw drive. It is suggested that you replace the screw, as the one provided has the propensity to rust. The base of the piece holds the screw and lock in place. The lock can be placed in the piercing or it can be used as an accessory in another piece of jewelry.
Please Note: The 6g (4mm) bondage lock does not come equipped with a key.
Specifications:
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
JPG (300 KB)
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Gauge
18g, 16g
14g, 12g
10g–00g
Internal Thread Pattern
0.8mm or 0.9mm
1.2mm
2.0mm
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
14g, 12g, 10g
External Thread Pattern
1.6mm
View Shipping & Return Policies