Free Shipping on Orders $500+ See Details
M4 Metric R2D2 Brass Back Binding Post - Tattoo Machine Supplies
The rear binding post is one of the locations where the clip cord connects to the machine. The R2D2 Brass Back Binding Post is M4 Metric with a length of 13mm for the brass section only. The brass end measures 8mm thick and 8.5mm at the base. There are two holes for attaching the clip cord, located on the sides. The diameter for the screw hole is 4mm. The thread length, or distance of each thread, is 0.75mm. For a quantity of one, you will receive the full R2D2 Back Binding Post Set, as pictured. We also offer two other styles of the Brass Back Binding Post.
Specifications:
Related Products:
Brass Back Binding Post Pawn Brass Back Binding Post
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
JPG (300 KB)
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Gauge
18g, 16g
14g, 12g
10g–00g
Internal Thread Pattern
0.8mm or 0.9mm
1.2mm
2.0mm
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
14g, 12g, 10g
External Thread Pattern
1.6mm
View Shipping & Return Policies
